YEE Stream Nano Tank Setup: Filter and Light in One
By Castle Dawn Aquatics | Published: 2026-11-03
Category: ハウツーガイド
Set up the YEE Stream Nano Aquarium Tank with its built-in filter and light, then cycle it safely for shrimp or a first small fish. Steps, checkpoints, and common mistakes.
Quick answer
Set the YEE Stream Nano Aquarium Tank on a level, weight-bearing surface, rinse and position the included filter and light, plant the shallow tank, then fishless-cycle it for two to four weeks before adding shrimp or a small fish. Test ammonia and nitrite before any livestock goes in.
Why the shallow, long shape changes your setup order
The YEE Stream's long, shallow footprint is built for stream-style and nano riverbed layouts, so plan the hardscape and plant positions before you fill it. A sloping substrate from one end to the other reads as flow and keeps the front glass visible. Because the tank is shallow, tall stem plants can outgrow it quickly; choose low carpeting plants, mosses, and small ferns that suit the height.
The built-in silent side filtration and S-shape water-flow system mean you do not add a separate hang-on filter. That saves space but also means you cannot swap filter media for a different brand without checking what the side compartment accepts. Confirm the media and replacement parts available for your size before you commit to the layout.
Light, flow, and the first-cycle trade-off
The included light is matched to the tank, so you do not need to buy a separate fixture for a low-to-medium plant list. Run it on a timer from day one, starting around six hours and increasing slowly if algae stays controlled. More light during the cycle feeds algae, not bacteria, so resist the urge to run it all day.
The side filter's flow is gentle enough for a shallow stream layout, but a first cycle still needs surface movement and oxygen. Keep the water level high enough for the filter to run correctly, and do not bury the intake in substrate or moss. If you plan to keep shrimp, note that the tank's filter intake design matters; check that shrimp cannot be drawn into the side compartment, and add guard foam if needed.
Step-by-step YEE Stream setup
- Place the tank on a level, weight-bearing surface: Fill the tank with water only after it sits flat on a sturdy desk or stand that can hold the filled weight. Check that the side filter compartment is accessible for maintenance. A wobbling or soft surface can stress the glass; test with a spirit level before filling.
- Rinse the tank and filter media: Rinse the interior and the supplied filter media in dechlorinated water to remove dust. Do not use soap or hot water on the glass or media. Skip the rinse and you may get cloudy water and a slow first cycle.
- Install the filter and light: Seat the side filter and light as described in the YEE Stream instructions for your size, then fill the tank with dechlorinated water to the correct level. Plug in and confirm the flow moves the surface without splashing out. If the filter is noisy or the flow is weak, check the water level and that the intake is not blocked before assuming a fault.
- Add substrate and hardscape for a stream layout: Slope the substrate from one end to the other and place hardscape so the front glass stays clear. Leave space around the filter intake. Burying the intake in substrate or moss reduces flow and can starve the bacteria.
- Plant low species suited to a shallow tank: Use carpeting plants, mosses, and small ferns; avoid tall stems that will break the surface. Plant before filling completely so you can adjust positions. If plants float, weigh them down or use a finer substrate rather than adding more light.
- Start the fishless cycle: Add a source of ammonia according to a fishless-cycle guide, then test ammonia and nitrite every few days. The tank is ready when ammonia and nitrite both read zero and nitrate appears. Do not add shrimp or fish while ammonia or nitrite is above zero, even if the water looks clear.
- Add livestock slowly and guard the intake: After the cycle, add a small cleanup crew or a few shrimp first. If you keep shrimp, fit intake guard foam and confirm none are drawn into the side filter compartment. Add livestock in small groups over weeks; a sudden load can crash a new cycle.
Product facts
- YEE Stream Nano Aquarium Tank with Filter + Light: Low-iron crystal glass with 91 per cent light transmittance. Clear glass makes the shallow stream layout easier to view and photograph, so spend time on hardscape placement rather than hiding equipment.
YEE Stream Nano Aquarium Tank with Filter + Light - YEE Stream Nano Aquarium Tank with Filter + Light: Built-in silent side filtration with an S-shape water-flow system. You skip a separate hang-on filter, but you must keep the side intake clear and confirm replacement media fits that compartment.
- YEE Stream Nano Aquarium Tank with Filter + Light: Long, shallow shape designed for desktop stream-style and nano riverbed aquascaping. Choose low plants and a sloped substrate; tall stems will crowd the shallow water column.
