Back to Blog
How-to Guides 2026-10-21 Castle Dawn Aquatics 16 views

How to Use a Shrimp Feeding Tube and Dish Safely

How to Use a Shrimp Feeding Tube and Dish Safely

Learn how to set up and use a hang on back shrimp feeding tube and dish to spot feed Neocaridina and Caridina shrimp without polluting your aquarium.

Quick Answer

A hang on back shrimp feeding tube and dish lets you deliver food directly to your shrimp without scattering it across the tank, reducing waste and water quality issues.

Why Use a Feeding Tube and Dish?

Shrimp, especially Neocaridina and Caridina, are slow feeders that graze over time. Without a feeding dish, food can sink into the substrate or get trapped in filter intakes, where it decomposes and spikes ammonia. A feeding tube and dish concentrate the food in one accessible spot, making it easier for shrimp to find and eat before it spoils.

The Castle Dawn Aquatics hang on back (HOB) feeding tube is made from food-grade glass and acrylic, so it resists staining and bacteria buildup. This keeps the feeding area cleaner between uses.

What to Watch Out For

The tube relies on a suction cup to hold it in place. Make sure the cup is firmly attached to a clean, smooth surface. If the dish is too high or too low, shrimp may struggle to reach the food, or food may drift out before they finish.

Overfilling the dish is the most common mistake. Shrimp have tiny appetites—a pinch of food is plenty. Too much food will still break down and foul the water, even if it's contained.

Step-by-Step: Using Your Shrimp Feeding Tube and Dish

  1. 1. Attach the suction cup and dish: Clean the inside of your aquarium glass where the suction cup will go. Press the suction cup firmly onto the glass, then clip the feeding dish onto the cup. Adjust the height so the dish sits an inch or two above the substrate—this keeps it accessible to shrimp but out of the way of bottom-dwelling fish. If the suction cup won't hold, wipe the glass with a clean cloth to remove biofilm or algae before reattaching.
  2. 2. Insert the feeding tube: Slide the glass tube into the holder so the bottom end rests directly above the feeding dish. The top of the tube should stay above the water line. This creates a direct channel from the surface to the dish. Make sure the tube is vertical and not touching the dish—food needs a clear drop path.
  3. 3. Add food through the tube: Drop a small pinch of shrimp food (pellets, wafers, or powder) into the top of the tube. The food will fall straight down into the dish. Start with an amount your shrimp can finish in 1-2 hours. Common mistake: adding too much food at once. Shrimp will scatter uneaten food, defeating the purpose of the dish.
  4. 4. Monitor and remove uneaten food: Check the dish after 2 hours. If any food remains, use a turkey baster or pipette to gently suction it out. Leaving uneaten food in the dish can still pollute the water, even though it's contained. If you consistently have leftovers, reduce the portion size next feeding.
  5. 5. Clean the dish and tube weekly: Remove the tube and dish from the tank. Rinse them under warm water and scrub gently with a soft brush or sponge. Avoid soap or detergents—they can leave residues harmful to shrimp. The stain-resistant materials make this quick. A clean feeding station prevents biofilm buildup that could compete with your shrimp for food.

Product Facts

  • Hang on Back Shrimp Feeding Glass Tube & Adjustable Dish: Made from food-grade glass and acrylic, stain-resistant to prevent bacteria build-up. This means the feeding dish stays cleaner and safer for your shrimp between cleanings, reducing the risk of harmful bacterial blooms.
    Hang on Back Shrimp Feeding Glass Tube & Adjustable Dish
    Hang on Back Shrimp Feeding Glass Tube & Adjustable Dish

Related Articles

Customer Service
Home
Products
Cart
Profile